AOSP on Blueline running Mainline kernel
Not to be confused with AOSP's aosp_blueline-userdebug build target, goal of this project is to run AOSP on Pixel3 device with mainline linux kernel.
- Upstream aosp_blueline-userdebug build target use Qcom prebuilt firmware and services binaries which only work with msm-android-4.9 kernel.
- pixel3_mainline-userdebug build target use mainline linux kernel and can boot to console right now with ADB. Work is going on to enable Display panel + Mesa/Freedreno support.
Compile AOSP and kernel image from sources for linaro_blueline
1. Download the AOSP source tree and pixel3_mainline device config from local manifest:
2. Build AOSP:
3. Build kernel image and boot.img:
Run the following commands to clone and build kernel Image:
1 git clone https://git.linaro.org/people/amit.pundir/linux.git -b dragonboard-android-mainline-tracking 2 cd linux 3 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- blueline_defconfig 4 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- Image.gz qcom/sdm845-blueline.dtb -j`nproc` 5 cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sdm845-blueline.dtb > Image.gz-dtb
Build boot.img by running following mkbootimg command:
Boot Pixel3 in fastboot mode by powering off the device and then hold VOL down button and press/hold POWER button until bootloader (fastboot) comes up. Download and unzip vbmeta.img from Pixel3 factory images, which is used to disable image verification. And then run following commands from HOST machine while Pixel3 is still booted in fastboot mode:
1 # unlock bootloader 2 fastboot oem unlock 3 4 # disable image verification if you haven't already 5 fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta.img 6 fastboot --disable-verity --disable-verification flash vbmeta_b vbmeta.img 7 8 # avoid a known smmu crash by turning OFF the display 9 fastboot oem select-display-panel none; fastboot reboot bootloader 10 11 # set _b as active partition since we mount system_b as super partition 12 fastboot set_active b 13 14 # flash AOSP images and reboot 15 fastboot flash system out/target/product/pixel3_mainline/super.img 16 fastboot flash userdata out/target/product/pixel3_mainline/userdata.img 17 fastboot flash boot boot.img 18 fastboot reboot 19 20 # login to Android console 21 adb shell
When done with testing, reboot into fastboot/bootloader mode, turn ON the display and switch OFF the device from bootloader menu :
ToDo / Known Issues
fastboot boot boot.img is broken
- Display is WIP
bootctrl HAL is WIP. So if you run into FAILED (remote: 'Failed to load/authenticate boot image: Load Error'), then run following command:
1 fastboot fastboot set_active b
Need some help?
In addition to this wiki, we use various mailing lists, IRC, collaborate.linaro.org and projects.linaro.org/LCG to communicate.
- LCG's public mailing lists
- IRC via irc.freenode.net