Samsung SMDKV310 test results 11.07

Audio

  • speaker-test to check if sound is generated

  • cat /proc/asound/cards to check which cards are detected

  • alsamixer to check which mixers are available and if the volume change works

Category

Feature

Priority

state

notes

Audio

HDMI audio

3

FAILED

Audio Play back for all 8,16 and 24 streams only

audio on jacks

4

FAILED

24 bit audio palyback has noise and slow play rate

Video and Graphics

  • boot with dvi only monitor and check if was it detected and functions correctly
  • boot with hdmi only monitor and check if was it detected and functions correctly
  • boot with dvi and hdmi monitors and check if they were both detected and function correctly
  • fbset to check if default monitor resolution was detected properly

  • xrandr to get list of available resolutions and list of detected displays

  • xrandr --output NAME-OF-OUTPUT --off to check if it handles turning off display

  • xrandr --output NAME-OF-OUTPUT --auto to check if it handles turning on display

  • es2_gears to test simple performance

Category

Feature

Priority

state

notes

Video Out - LCD

monitor recognized

3

CANT TEST

Desktop is viable

native resolution used

3

CANT TEST

Desktop is viable

xrandr lists resolutions

4

CANT TEST

xrandr changes resolution

4

CANT TEST

disabling output results in broken display

4

CANT TEST

Please provide a HOWTO

Video Out - HDMI

all resolutions work

4

CANT TEST

Mouse and keyboard doesn't work

monitor recognized

3

PASSED

Desktop is viable

native resolution used

3

PASSED

Desktop is viable

xrandr lists resolutions

4

CANT TEST

xrandr changes resolution

4

CANT TEST

monitor hotplug

4

PASSED

If you unplug/re-plug, the display reappears

disabling output results in broken display

4

CANT TEST

Please provide a HOWTO

Video Out - DVI

all resolutions

4

NA

No DVI

monitor recognized

3

NA

No DVI

native resolution used

3

NA

No DVI

xrandr lists resolutions

4

NA

No DVI

xrandr changes resolution

4

NA

No DVI

monitor hotplug

4

NA

No DVI

disabling output results in broken display

4

NA

No DVI

Graphics

Framebuffer

2

PASSED

Display is visible

Framebuffer X11

3

PASSED

Display is visible (using X11)

Ethernet

  • dhclient -v eth0 to get IPv4 address

  • iperf -c to check performance

Category

Feature

Priority

state

notes

Ethernet

Onboard Ethernet Kernel

1

PASSED

Onboard Ethernet U-Boot

3

PASSED

Addresses set and a ping was possible

Onboard Ethernet - ifconfig up/down

2

PASSED

Onboard Ethernet - dhclient

2

PASSED

Onboard Ethernet - network-manager

3

PASSED

Wireless

  • iwconfig to check for presence

  • iwlist wlan0 scan to check for network detection

  • NetworkManager applet to connect to any wireless available

Category

Feature

Priority

state

notes

Wireless

Onboard Wireless Kernel

4

NA

Onboard Wireless - wireless-tools (scan, unprotective + dhclient)

4

NA

Onboard Wireless - wpasupplicant (WEP, WPA-PSK)

4

NA

Onboard Wireless - network-manager (clear, WEP, WPA-PSK, eth + wlan)

4

NA

Bluetooth

  • hciconfig to check for presence

  • hcitool scan to check for BT devices detection

Category

Feature

Priority

state

notes

Bluetooth

Bluetooth Kernel Driver

4

NA

USB controller

  • lsusb to check for devices connected

  • plug devices and check do they work
  • plug thumbdrive and check was it automounted
  • hdparm -t /dev/sda to check storage performance

Category

Feature

Priority

state

notes

USB Host

Kernel/Controller

1

NA

USB not available

Kernel/HID keyboard

2

NA

USB not available

Kernel/HID mouse

2

NA

USB not available

storage

2

NA

USB not available

performance

4

NA

USB not available

USB Device

Gadget driver loaded

FAILED

USB not available

Mass Storage function

FAILED

USB not available

Ethernet function

FAILED

USB not available

USB OTG

Role Host

FAILED

USB not available

Role Device

FAILED

USB not available

SD

  • hdparm -t /dev/mmcblk0 to check storage performance

Category

Feature

Priority

state

notes

SD/MMC

Only primary SD slot supported

kernel

1

PASSED

u-boot

1

PASSED

performance

3

PASSED

Serial

  • run minicom on desktop and check does messages from board appears

Category

Feature

Priority

state

notes

serial port

serial kernel

1

PASSED

serial u-boot

1

PASSED

auto root login

2

PASSED

kernel output

2

PASSED

Multimedia

Category

Feature

Priority

state

notes

Multimedia

Video to Framebuffer

3

FAILED

MM components not delivered yet

Video to X11

4

FAILED

MM components not delivered yet

Video Acceleration Mem2Mem H.264

4

FAILED

MM components not delivered yet

Video Acceleration Mem2Mem MPEG-4

4

FAILED

MM components not delivered yet

Video Acceleration FullScreen

5

FAILED

MM components not delivered yet

Video Acceleration X11

5

FAILED

MM components not delivered yet

Video Acceleration X11 ZeroCopy

5

FAILED

MM components not delivered yet

Power Management

  • ls /sys/kernel/debug | grep clk

  • ls /sys/devices/system/cpu | grep cpufreq

  • ls /sys/devices/system/cpu | grep cpuidle

  • powertop

  • powerdebug

Category

Feature

Priority

state

notes

Powermanagement

clock tree in debugfs

3

CANT TEST

Not available in evt0

P-states (cpufreq driver)

3

CANT TEST

Not available in evt0

C-states (cpuidle driver)

4

CANT TEST

Not available in evt0

powertop

2

CANT TEST

Not available in evt0

powerdebug

2

CANT TEST

Not available in evt0

Cycles/1107/BoardSupportStatus/Samsung/SMDKV310/Ubuntu (last modified 2011-07-29 17:02:39)